AHA/NHC Conference 2014 Grand Rapids #homebrew #NHC

I just attended the AHA Conference for 2014 in Grand Rapids, and I am capturing my thoughts here.  I realize I have a bunch of negatives here, but that does not reflect the truly great time I had, it’s just that much of good points were the same as last year.

Flights

Wednesday was a day of airports,  travel to Grand Rapids is tricky.  There were no great flights to get there.  I had to get up at 5am to catch a flight to Minneapolis and .  On the connecting flight I met a number of homebrewers including a few from Australia.  Most of us went the same hotel, the Riverfront, so we shared a taxi.  We then hooked up and spent time hitting HopCat which had nice beers and food, and then I discovered it was Stone Night.  I immediately took over ordering beer for the Aussies 🙂

Judging Second Round NHC

I have not been able to make it to judge second round before so this was exciting.  It also started at 8am, which mean getting up at 7am, which meant 4am for me.  I must really want to do this, or I am just stupid with time zones [this would later come to haunt me].  The second round is supposed to be about rating beers quickly, as they have already been judged, and are the best of the first round (there are 7 regional centers and beers advance from all of them.  We had a table of 10 judges, 5 pairs, and I think we did 8 beers.

I judged Wood aged and Smoke Beers, Category 22.  The fun of this category is to justify your taste buds from a smoked Helles, to a Russian Imperial Stout in a Bourbon Barrel (which was half the entries, to the point we joked that it needs its own style).   I think the entire table, or just Drew Beechum, gasped when I explain that I loathed coffee.  That did not me stop from really appreciating a beer with coffee added, mostly because I thought their use of Oak was the best of all of the beers (meaning we could sense it was there, gluing flavors together, but was hardly detectable).  Later at the Mini-BoS the other judges complained about the type of coffee used (good god Coffee and Beer snobs together), so I felt good about sending it up.

When judging you fill out a score sheet and rate the beer on Aroma, Appearance, Flavor, Mouthfeel, and Overall Impression.  You either write-up a score sheet, or fill out a check list and then score them out of 50, according the specific style guidelines.  A Best of Show is when all of the best beers are judged against each other, but no scores are mentioned.  A mini-BoS happens when there are enough entries that a category.  Typically this involves a fresh bottle of the beers you marked for BoS and 1 judge from each group. We had 11 beers which meant the first focus is on eliminating beers, to help the hard decisions ahead.  Sometimes second bottles taste different.  I’ve had the best beers I’ve judged taste off in the mini-BOS.  There is an odd thing that happens, you tend to fight for beers you passed up, somewhat out of defensive ego, but also as an advocate for “your team’s beer.”   I really thought Drew did a good job of narrowing opinions using good math/stat analysis when we got to 5 beers.  It was clear what was #1 and #2, and all we had to do was pick #3 (rank does not matter) from one of two beers.  That was much easier than hemming and hawing over 5 beers.

clip_image001

Best Talks

The Malt Nerds History Hour

There is always the one talk which makes the entre event worth it, and this was it.  The speakers were Andrea Stanley an artisan maltser (http://valleymalt.com/) , John Mallett  from http://bellsbeer.com/.  Since this was history, they dressed in period costumes from the 1800’s:

clip_image002

They talked about the history of malting around that time, and focused on one malt that has disappeared, Brown Malt.  It turns out brown malt was what made Porter, well Porter, in the 1800’s.  Andrea recreated the process for making brown malt, and actually made a “full” batch of it.  In short, she took soaked malt and kept it over a hard wood heat source, basically smoking it.  Because it was soaked the grain would eventually explode like popcorn does.  She had a cross section of a normal malted grain, which is all white with endosperm, and brown malt which is caramelized from the inside, in an explosive way, like a cross section of a geode (thunder egg).  Because the grain was turned by hand the kernels ranged from white to black.

She handed out a sample of the malt and we got to smell and taste it.  It was sweet like crystal but less cloying and of course the flavors were varied amongst the grain like homemade toasted pumpkin seeds .  They was a very nice smoke aroma and flavor.  John then broke out a porter that Bell’s has homebrewed with the grain.  It really tasted different and IMHO far better than most porters (Bell’s Porter was sent around as well).  The brown malt added a superior roast/toast/caramel flavor and perfect amount of smoke.  The smoke sort of glued together the other flavors, rather than being a prominent flavor itself.

And this is what makes the event worth it, while AHA members can hear the talk and see the slides, unless she makes the malt again, and she only produced 18 lbs.,  via a labor intensive process, I may never again get a chance to taste that grain and porter.

And to answer the question homebrewers are asking:   In 1817 Daniel Wheeler invented a process that blackened grain directly in a drum, allowing brewers to stop using a very expensive ingredient, use less of a cheaper one, and the flavor of porter changed, against the desire of England’s beer drinkers.  Why?  The usual: taxes, labor costs, and the fact that malting houses tended to go up in flames due to the smoking process.  Listen to the talk for more details.  Oh and the blackening process?  Turns out it was the one of the first times someone patented a process for malt, thus it was referred to as “patent malt” or as we know it know “black patent” (some more details: http://faithfulreaders.com/2012/05/06/black-patent-malt-and-the-evolution-of-porter/).

A pretty good blog about someone else making this kind of malt (hornbeam smoked) and straw based can be found here http://perfectpint.blogspot.com/2011/12/making-diastatic-brown-malt.html

Michael Tonsmeire The Influence of Mashing on Sour Beer Production

This is when the impact of getting up at 4 am (my time) for judging and 5 am for the flight caught up with me.  I was dozing off in the talk, even though it seemed fascinating.  I will want to re-listen to it when it comes online.

John Palmer’s  Water Chemistry and Beer pH

I was wary of this talk.  Water Chemistry can lose me quickly, but John did a very smart talk on specific interactions focusing on pale ales and hop perception.   He had two sample of beers, which *all* talks should do.  One with each profile he talked about.  When this talk comes out, it will be worth listening to.

2014 BJCP Style Guidelines

Changes are a coming!  BJCP has a pretty big change list out.  The biggest impact will likely be to specialty beers and IPAs.  They added several new categories and a few new styles:  2014 Style Guideline.  I think I might need to take the written exam now if I want to make national…

Let’s Brew Small

James Spencer from http://basicbrewing.com  gave a great talk on doing small batches of beer.  It was not just how, but why and some very good examples of beers he’s done for recipe creation, experimentation, and cost savings.  He also released the results of David Curtis’s experiment.

Best Beers

There many, many great beers.  When going to an event like this, you need to have a plan, you cannot drink everything.  My plan this year was to taste as many Rye beers as possible.  While the pro brewers were a dismal bust (see below) the homebrewers brought it.  It confirmed my opinion of Rye as a malt in that it is dusty/musty sometimes spicy and generally something I do not like, unless it is done “right” in which case it is awesome.  Go figure.

Major Funk:  This was brewed by Eric [something like Fouc but not pronounced the way you wish].  Eric has managed to grow a variety known as Major (though I cannot find a link).  Eric takes these apples and spontaneously ferments them.  The cider was amazing.  It definitely had a brett mustiness but against a gentle sour of the apple (which was excellent). This was the best beer until the one I cannot name (below).

Rye Saison:  Of all of the Rye beers I tasted the Rye Saison.  It had the musty/dusty of the Rye mixed with the Banana/Spice of the Saison.  While I did not grab a photo of that one, I did of the second best Rye, McFly Rye, which clearly won for label”

clip_image003

Lennenenhinininenen:  This beer went on at the end of the night.  And honestly the way the guy wrote it on the chalk board was sorta “Castle of Arrrggghhh” style.  I thought the name was a joke until a woman recognized the style as asked for it by name.  I cannot find any details on the style.  My memory is weak here (it was towards the end of Club night) but it was a perfect blend of smoke, sour, and malt.  It was wonderful and absolutely different.  Several of the folk I was with agreed.

Club Night

At first I thought club might was a bit lamer than prior ones, there were few booths with ridiculous themes expressed to the max.  Then I realized the effort was more in the taps than the booths.  Take the one, which solved the analysis paralysis problem by having logs with numbers on it flowing around the booth, you picked a log and ordered the beer:

clip_image004

Or the wood work:

clip_image005

Or the super creative naming:

clip_image006

There were still costumes:

clip_image007

clip_image008

And while maybe smaller than previous club nights, it was not small:

clip_image009

Registration process

In the past years the conference sold out in hours which is pretty unfair to people who cannot be connected at the time of the conference ticket release, especially since many people drop out over time.  This year the AHA went with a lottery process that turned out to be unnecessary as the number of people who applied was less than the tickets sold.

One of the  byproducts of this process was the elimination of the Social Package, which allowed a full paying member to bring a guest, for the social events (Expo, Hospitality Suite, Welcome Toast, Pro Night, Club Night, and optionally the banquet).   The main use for this is to allow someone to bring their significant other or friend, who will not want to go to the talks, but wants to engage socially.  I’ve gotten this for my wife for two years and it kind of stung that she could not get this again (and she was in the main picture for the conference at http://www.ahaconference.org for the last year, the purple haired woman).  In all truth, she could not attend this year for other reasons, but would love to attend next year if our kids’ school schedules allow for it.  Several local members who have attended with their SO’s in the past feel pretty bitter about this.

I do understand the desire to ensure that  tickets are sold first to members, but they could have opened up the social pass when they realized how many were left unsold.  However, the real reason I think it should be open is for locals.  When the conference was in Seattle many local homebrewers who could not get out of work, or afford a full pass, got social passes.  Maybe AHA will want to have local passes in the future, if not the social passes again.

Pro Night, or the lack thereof

This year Pro Night did not happen.  There were reasons stated why, but none of them felt like they really ring true.  Supposedly the survey has indicated a downward trend of Pro Night.  I can understand why, the brewer’s stopped bringing their A-Game and started treating it like another beer-fest.  Frankly the sampling in Phili was mediocre and even Seattle seemed less exciting.  I am not interested in getting a beer I can buy down the street, I want something great, unusual and maybe a chance to talk to the brewer.

Instead they had something called a welcome night, and then you had the option to pay more money to go to the BN Army party.  While I will not hold it against the BN, frankly I was not excited to pay more money to go to wait in line to get a bus to drink beers in baseball field.  Part of the reason I go to the conference is to be in one place and be focused on exploring beer, not just drinking it.  Several people felt the AHA sold out to the BN do they could get more money.

The event they did have (a welcome reception), simply put, sucked.  I got there a bit late (due to my nap and lack of busses) and the food was gone, and the beers were scattered around card tables with hotel staff pouring them out of pitchers.  The staff had nothing to do with the brewers, the beers were not in any sensible order, so I wound up not being able to find the beers I wanted to try, and had no one to talk to about the beers that were there.  When you did get beer, it was usually slightly warm, flat and had little or no aroma, since it was sitting in a pitcher for some time.

Supposedly there was going to be more pro-brewers in the social club, but I never saw them there.  Maybe they were there, but it was not clear to me.

The final hospitality slot, after the banquet, was worse.  Instead of the clubs running it, they had pro beers, but no pros.  The beers were set up in hallway, there was no rinse or drinking water nearby (I found a single cooler a ways away), and none of the beers had good aroma.  Also since there was not any homebrew, they did not bring out the left over beers from the competition, which was so much fun in prior years.

t is really criminal that the AHA would allow such awful treatment of beer at, and this is not hyperbole,  the premier beer related event in the world.  Whatever the theories they had on this, were completely wrong and left a huge negative impact on the conference (not just for me, but for many people, and I was not soliciting opinions).  The AHA needs to do a Mea Culpa and return Pro Night, but make it clear to the Pros what is expected.

Schwag Bag

One cool thing  about NHC is the schwag bag.  This year it had two beers, a glass, more Saison dry yeast, lots of stickers, less openers, and oddly no hops.  Northern Brewer had a cool thing:  a button with a number on it.  You had to find someone else with your number on it and then go to their booth.  This made people do some creative things, like taping their number to their equipment, or announcing the number when asking questions.  It seems like a way to meet people.  This Schwag is so much better than any conference I’ve attended (which is a lot) with the exception of Can Sec West  which had the best jackets (still have 3) and gave out Knives (passed TSA 2 times :)).

Banquet

After a bad experience getting food last year (both getting my wife’s vegetarian option a few hours late, and awful), I chose to skip it this year and work out at the gym.  I am so happy I did that (and given the hotel gym, this is not a positive on the banquet).  The Banquet started at 7:30pm, and seemed to run past 11:00pm.  I heard the acoustics were awful, which is just stupid since apparently they were bad at the welcome reception.   Does the convention center not know how to set up their own space?

But the real problem is that the awards for each of the categories take forever to go through.  I think the conference organizers need to wake up and radically change things.  I know some people feel that everyone need their moment in the spotlight, but really ask yourself, does someone who entered category 22 need to wait for the previous categories?  Is it fair to mead people that most people have left?  If people want a medal and photo, do it in bulk.  Announce all of the winners, have them line up and go through a quick process.  Georgia Tech did this for graduation, and they cut the boring time down considerably.

I did hear from most people that the food was good (I heard from a few who did not like it, but that is normal).  One interesting thing is that Rouge has sponsored the beer for the event for many years, but this year it was Sam Adams.  I like a lot of Sam Adams’ beers, but they are not Rouge.  Apparently more than one table left unopened beers behind.

Unless it changes next year, I will gladly skip again.

Travel and Lodging

Probably the major downside to choosing Grand Rapids was the cost of travel.  It is a small city (town?) and not a major airport hub.  Getting flights to there was crazy hard and expensive.  Hard and expensive enough that people chose to drive from Seattle, or from a major airport like Chicago., or as is clear from ticket sales, not go. Getting a flight from Seattle meant painful timing and cost choices.   Most everyone I talked to had problems, except those people who drove (in which how many more breweries could they hit was problem #1), and the Commercial Pilot from Reno who was flying free, and he was highly sympathetic to the flight plight.

Lodging was also an issue.  I missed the announcement that the hotel blocks were open and wound up with few choices:  very expensive rooms near, but not at the convention center, fairly expensive hotels within a few miles, or really far hotels.  I am a huge believer in getting rooms at the event for conferences.  The main advantage is “time to room” which means you can drop stuff off, change clothes, or grab a 20 minute nap.  On the first full day I found myself exhausted due to a combination of time zones and lack of sleep (see Sour Beer talk above), plus my back was hurting from carrying my backpack and schwag bag, so I decided to head back to the hotel to rest and drop off stuff.  It was 2.2 miles away and while there were busses that ran to the hotels every 20 minutes, I only found out that the busses had an inexplicable hour off between 3:20 and 4:20.  After waiting for 30 minutes I paid someone to take me there.  That blew any chance of getting in an afternoon talk.  Apparently, the close hotels were at least 10 min walk, but that would have been certain, and not random.

The hotel I stayed in was the Riverfront.  To be honest it cost me $110/night and it was really worth $50.  It was run down and poorly maintained.  I think I barely won the crappy hotel-off with some folks whose air conditioner only started working after they discovered the filter was fully clogged  and had to clean it themselves (this was after maintenance looked at it), vs. my description of the “work-out” room, which  I did in fact attempt to work out in:  There were two exercise bikes, 2 stair masters, 1 treadmill.  The only things with a power cable were the treadmill and the carpet dryer which was clearly drying the carpet under the broken water fountain.  The exercise bikes seats did not move.  All of this was in a very humid 8×10 ft. space.  Oh and the scale said I gained 18 lbs. at the conference (only slightly accurate).

The vending machine signed changed daily, this was a favorite:

clip_image010

When I read this, I noticed the bag, which is Pop Corn, which made the sign even funnier to me.

On the plus side the walk to the hotel (which I did several times back and forth) was along the river and either quiet industrial or a very green park.  Oh and the bar was stocked with very good beers, both local and costal.  However the band on Saturday was so bad I had to leave.  I can normally sit through any music (due to my lack of skill with music, including listening to it), that was a first for me.

Then again this was my view:

clip_image011

Grand Rapids

Grand Rapids was nice, for the area near the conference center.  Like a lot of Midwest towns, it is downturned, but like many University towns, the area near the University is great.  There were many bars and breweries to walk to, and plenty of good eats in range.  Walking away from the conference center had the usual mid-west issue of great, great, great, shut down factory, seedy bar, sketchy area, hotel.

However being a good college and beer town it had it some awesome points:

The beer bike trailer:

clip_image012

clip_image013

The B.O.B. (Big Old Building) A brewery on floor 0, bars clubs, etc.  A wall of cans and huggable woodwork:

clip_image014

Mike Stoccardo like to hug trees in all forms:

clip_image015

And of course Bob Stempski with an awesome shirt:

clip_image016

Overall

Overall the conference was great.  Although, many parts seemed a let-down from prior years.  I know how hard it is to run a conference, especially as it grows.  I appreciate the efforts of the AHA full-timers, and know how much of the work is done by volunteers.  I’m planning on going to San Diego next year and I hope they address the issues that pointed out here, but I really hope that San Diego takes it up a notch from 4 years ago, especially the club, because they rocked it.

Advertisements

Brewing BIAB for Brad Smith at NHC 2012

I’ve been sitting on this post for over 6 months, time to post it I think 🙂

The 2012 National Homebrewer’s Conference (NHC) was held in the Seattle Area.  The local clubs were heavily involved.  At some point I was asked if I could help out at NHC by brewing a Brew in the Bag (BIAB) beer for a talk being given on BIAB.  Without hesitation, I said yes!  I can whip out 5 gallons without a problem.  I was already going to do a keg or two for club night.

Then I found out they wanted me to brew a BIAB beer, and…  this is where writing or talking about this get interesting, what do you call a non-BIAB beer?  “Normal” seems pejorative to BIAB and “other” seems wrong, so I will say non-BIAB which is accurate, but flawed (see next paragraph).

So now they’ve asked for me to brew a BIAB and a non-BIAB beer.  The did offer to have someone else brew the non-BIAB beer, but  I knew that to have a good side by side test, 1 brewer really ought to do both.  Of course, I did not mention I had never brewed a non-BIAB, All Grain batch before… (see even “non-BIAB” is flawed since it could be partial or extract…).  Never one to shy from over-commitment, I thought it was high time to see what I was missing, and use this as a forcing function to use a mash tun.

I chose to brew my standard All Cascade APA since I had a bunch of Cascade Hops and it was my default experiment brew.  Also it a clear beer which should help show that BIAB beers are not cloudy.  And, and this become more important later, if it was not up to par, I could always drink it myself.

I needed to borrow a cooler or other mash tun.  As my deadline was looming I was failing to locate the tun.  Finally, after asking for help,  Steve Antoch came through and lent me his igloo converted cooler.  Now I was all set to brew 5 gallons of BIAB and non-BIAB beers.  I had recently bought a second turkey fryer and I was set to go side by side.

That’s when the email came in with a “ok you going to brew 10 gallons of each,” message. Gulp!  Around now I suddenly made the connection that the “guy” was I brewing for was Brad Smith of Beersmith.  Double Gulp!  I should really think about this stuff before saying  yes…

I considered,  the cooler was big enough for a 10 gallon batch; I just needed to plan for a longer day.  I had 4 large carboys, and I should have 3 kegs, plus 1 that was full of barrel brew, so I needed to buy an extra one or two.

I planned out the day.  I bought rice hulls since i tend to grind to flour and i had never ground for cracked grains (see my setup ). This is when I had to make a call… Do i grind both batches the same  or different?  I chose “same” which meant lower efficiency for BIAB than normal for me.

So I started with the BIAB batches by laying out hops.  That’s when I discovered that I do not have enough cascade hops for 4 batches….  So I had to modify the hop schedule.  I decided to add 1 oz. of  Amarillo to the brews.  Originally I had planned on no dry hopping but then I forgot the 1 min addition on the first batch, so dry hop it was for all!

WP_000014 (1)

Normally, I sparge/rinse my BIAB by pouring hot water as it sits in a strainer (see photo).  I basically heat water in a kettle until it is close to 170 and then pour it onto the bag and often get back many points of gravity.  To try to keep things simple, I did not do that.

I managed to hit both BIAB batches at 1040 (BTW here ‘s a hint, don’t start two batches at the same time, since I only have 1 chiller).

For the non-BIAB/cooler batch, I did an infusion mash while heating sparge water on the extra turkey fryer.  I dumped the wort in the main pot, added the 170 water  for 15 minutes, and then mixed the worts to get the OG the same.  I hit close to 1040 for both starts.  When I was done, one was 1042 and the other was 1047 so there was some boil off difference.

This means the cooler was more efficient than the BIAB which is unusual.  Normally I see 90% efficiency with the BIAB method (not 67%).  This is probably due to the coarser grind and lack of sparging/rinsing.

From there I added US-05 (hydrated) to each carboy and let them ferment.

After 2 days I got another email, turns out Brad Smith was giving two talks, and the conference was wondering if we had enough for both talks, which would be 20 gallons of each…  I had to say no finally.

Right before the NHC I had to kill and clean my kegs (one of those is “work” 🙂 ).   As I only had three, I was going to have to scramble to borrow one (kegs get scarce right before the conference).  That’s when I remembered the spare from Tom Schmidlin from when we kegged the club barrel brew…  This was also one of my mistakes…

I brought all four kegs to the hotel, scrambled to find them right before the talk, and then tapped one of each type.  Except now one of them was just not the same.  So I tapped another one from the same type, and shared it during Brad’s talk.

There were differences between the beers, but they can be attributed to the efficiency issue.

We had enough beer for both talks and I took the weird keg home.  That’s when I remembered I had previously used that keg for barrel beer and planned on filling with more barrel brew, so I didn’t need to clean it, I had just purged it…  Lesson learned.  And while different, the blend was awesome, another lesson learned…

Overall we proved that brew in the bag made the same beer.  Brad gave a great talk, people enjoyed the beers, and I learned I have no need to invest in the mash tun.

And if people think I’m slack for taking a year to get this post up, Steve just picked as mash tun up last week… 🙂

The Extra Sour Berliner Wiese #homebrew

UPDATE 2/21/2013 : pH measured 3.4, after being left out over night in a glass (i.e. no CO2)

I thought I did not like sour beers, until I had one, specifically a New Glarus.  It was awesome cherry with a sour to balance the sweet.  I then tried a Petrus Oaked Pale Ale which I really enjoyed  So, when, sometime later, I ordered “something like a Petrus, you know not too sour…”   was met with “Like Petrus, but not too sour?!!!!” I discovered I really like sours, apparently.  What I really discovered was that I like sour, but I m not fan of “funk.”  I think I just smell or taste it stronger  than many other people, so it overwhelms the beer.  Up until then most beers described as sour also had lots of funk (at least to me).

I am also a sucker for odd and more “natural” brewing techniques, and the idea of doing a sour mash by using naturally found Lactobacillus was too tempting.  Note, I did not try the beer first, I decided brewed it first.  It happened that James over at www.basicbrewing.com was also doing this, and the ran a podcast on it, as well a video.  I have links at the bottom.

I then bought a bottle of Full Sail’s limited release and shared it my Sister when she visited.  That’s when I discover she likes sour beers too!

My plan was to BIAB and just add a cup of 2 row to get the bugs in there.  The main tricks are to cut off O2, and keep the temp close to 120F.  This should keep the Acetobacter or Clostridium out.

Recipe is at http://hopville.com/recipe/1669338  The following is my motes and a diary and links:

8/24/2012 Mash day

  • Shot over 150 by a ways
  • BIAB Mashed,  Did not get a sample afterward, added 1 cup of grain to water when it cooled to 120F
  • Put the whole kettle into blue cooler with a water bath at 120

WP_000475

  • I sealed the top of the pot with cellophane

WP_000476

8/25/2012

  • Added hot water to bring outside to 120 a few times.
  • Used the autosiphon as a bilge pump
  • Souring smell leaking out (which means air in) is very nice.
  • I then got smart and added CO2 to top.

WP_000479

8/26/2012

  • Water at 90 again, seems to be set point.  Drained most water, added tap water at 112, then 4 kettles full of boiling.  Temp was at 120 when I checked, expect that it will drop.
  • Souring smell is nice still.
  • You can see some white, but mostly grain near top.  I wonder if keeping so much water blocks O2 from getting there, or is there O2 in the water?  Maybe I should boil the water first.
  • Definitely will need to build a heat stick.

8/26/2012 9:49:20 PM :

  • Sour mash smelled sour and sweet, fellow homebrewer Jason says like Honey, dead on.

Brew Day!  ( I cannot now remember if I brewed at night or the next morning)

  • Boiled, added hops for 15 minutes.
  • 8 Brix on going into fermenter, 1032, oddly what I expected at mash.  Which is higher than I expected….
  • Tasted, sour is spot on, exactly what I expected from smell!  Very excited.  The honey taste is very much like a cough medicine mom used t make, 1/2 honey, 1/2 lemon and a shot of whiskey (honey coats the throat, lemon cuts the honey, whiskey opens the bronchial tubes, still more effective than anything else I have tried).

9/2/2012

  • Pulled a sample and a bottle for road trip to Denver added 2 carb drops to a 750ml bottle.
  • B1004 FG, lots of bubbles, moved carboy downstairs.  Was a bit warmer lately then I would like.

9/8/2012

  • Tasting with sister and mom:  WOW IS IT SOUR.  Honey taste is mostly gone, but comes back when it is flat.  At first I was like, this sip is nice, then ok I will try another, and push it away, and then, I was finishing my glass, the bottle and fighting my sister over Mom’s….

9/12/2012

  • Went to New Belgium brewery.  Tried La Folie for the first time.  Slightly less sour than my Berliner Weise…  But tastes a lot like it mixed with our barrel brew….  Hmmm…  I still have a keg at home….

9/16/2012

  • Brought it home brewers meeting, for some, too sour for the style, for sour lovers, there is no such thing…

12/18/2012

  • Mixed 1/3 and 1/4 with the barrel brew and brought it to the home brewers dinner, overall a huge ht.  We should have soured the barrel 🙂

Links to research:

Basic Brewing Video:

Basic Brewing Podcasts:

Heat Stick #1 #homebrew

 clip_image001

The heat stick is an easy concept.  Think of it like a wizards staff of heat, or light saber!  Simply put, take an electric heating element from a water heater, attached a power cord, place the element at the end of a pipe, epoxy the connections, and add a few fittings.

The sticks are then added to the water or wort, plugged in, and heat happens.  You can heat all sorts of things with it, including Sous Vide pots, water buckets, hot tubs, etc.  You can use this to boost heating  for stove tops, or even use it to boil, though you might want more than 1, or a bigger one.

 Some notes of caution

  • This is electricity, it can kill you,  This is a lot of electricity
  • This thing gets hot, oddly not as hot when in the liquid as you might think (the heat dissipates into the liquid quickly, but the element is still hot
  • If you run the element dry, for any length of time, it will fry (literally it overheats in seconds)

DYI or buy

You can build your own, or buy one from Amazon as a "water bucket heater."  The ones form Amazon are around $40, a fellow homebrewer reports that it requires a deeper pot to maintain immersion than he wanted, but it works.

Water heating elements range in power.  It is tempting to go for the biggest one possible but over 1500 watts will require a 20 amp circuit, and you likely only have 15 Amp circuits around the house.  They pull a lot of steady power, so it needs to have a heavy duty, and preferably short cord, on a circuit with little else on it.  If you are building an electric homebrew system, where you can dedicate power outlets, you can go 240 and serious wattage.  I would never plug 2 into the same circuit (note, not just same outlet, but same circuit!).

I was able to buy all of the parts in 1 Home Depot run, building takes 30 minutes.  It does take a few days to build since you have to let the JB Weld cure for 24 hours.  Note, JB weld is rated to 600 deg F, and is food safe once cured.  Some of the other products in Home Depot did not meet both criteria.  The aquarium sealant I used for other projects is not rated for high temps and one of the example project  links  below had to rebuild because of that.  Total costs was under $30, and if you ignore the JB Weld, probably under $20.  I did not need a power cord as I have many heavy duty server cords to cut up.

Here are a few sites with instructions for building:

I was not sure what I wanted for the top end, so I did everything else first.  This means I could not run the power cord through a cap (with a hole drilled).  My choices:

  • Put  the element at a right angle so it does not touch the bottom, this also means it might touch my BIAB bag
  • Use a J fitting so I can hang it over the edge of the pot
  • Went with a 16 inch sink fitting for more room, this was a bad idea as it is too tall to use the J fitting in my pots, next time I will do 12 inch fitting
    Testing, and more Testing

I put it together and JB Welded it.  After a day I set it in a pot.  No leaks!  Then I ran a heat test.  It seemed to do a degree a minute from 60F to 100F.  I got to 140F when I had to stop.  I left it in there.  A few days later when I pulled it out, to my surprise water came out the tube .  I retested to see if water poured in the top (since I had not added the J fitting yet).  It leaked, very slowly.  I think the JB Weld had cured away from the threads.  I reapplied JB Weld and it worked.  Lesson:  Test leaks for days, after heating.

Control

I will have to control this via a relay.  I could potentially use the STC-1000 box, but at 1500W continuous, it seems a bit much to push through there.

What’s it doing now

Helping heat my hot tub of course!

 

clip_image002

8th MS Anniversary: Magic 8 Beer #homebrew

Update:  I posted an Instructable on this.

 

Each at Microsoft, people tend to bring in X pounds of chocolate (usually M&Ms), where X is the number of years they have been at Microsoft. 3 years ago, I celebrate my 5th year with5 gallons of Nutcastle Brown, since it has chocolate malt in it.  2 years ago, I brought my Accidental Imperial Stout with 6 oz. of chocolate nibs in it.  Last year I celebrated my Voyage at Microsoft  with my 7’Cs beer.

This year I tried to find a find way to work “8” into it.  And yes, even though I spent the last 3 years working on Windows 8, and we shipped right around then, and shipped Windows Phone 8, I never thought about that.  What I did think was “Magic 8 Ball.”

So I announce this year I have developed  the Magic 8 Beer!

The beer part was easy, Brew a Cascadian Dark Ale.  That took 1 second of mental effort and 4 hours to brew.

Now for the Magic 8 Ball part.  After many iterations of ideas, I settled on an 8-sided Paper die, which is Shellacked and Epoxied and cured to make it water proof, and food safe.

WP_001056

Each die has 8 sayings or pictures.  Each die is unique, though about 3/5 of the sides came from a short list of repeated phases.  The creation of the die took hours of research, prototyping and pondering.  The phrases took a couple of hours to create, the Visio file took a few hours to create (over time) and the shellacking, cutting, gluing and epoxying  to 5-6 hours more.

 WP_000974

Then came the cozies.  At a work event that had these cozies

clip_image006

which bent around the bottles or cans.  There were spares, and I knew I would use them somehow.  I hit the idea of dyeing them black and spray painting the magic 8 beer sign across them.

Great idea except it did not work.  The fluorescent green nylon did not take the fabric die, and the raised black ink just laughed at it.  So Plan B was spray paint it black then white stenciling.  Plan B failed with the green bleeding through.  Plan C was spray with white over the green, passable.  Plan F…G…H…, I lost track, was spray Killz, then black, then white lettering.  That is what I went with:

  clip_image008clip_image007WP_001057

The result was fine, the raised ink really pops.  The hard part was the stencil which got loaded with paint.

Cider Experiment #3–1 week Cider–1 day boom #homebrew

After bottling Cider Experiment #2 (still haven’t posted) Divide! commented that he liked the cider but hated the bottling (this was 100 bottles!).

I thought about it some more, and an experiment was born.

The Hypotheses

“could you make cider lazily, and  just bottle in the juice jugs themselves and be carbonated in a week?”

 

The steps:

My first experimental steps were:

  1. Buy 4 Jugs of cider
  2. Put yeast in all 4
  3. After 1 day, seal the lid for Jug 1
  4. 2 days in, seal Jug 2, do the same for Jugs 3 and 4 on days 3 and 4…
  5. At a week, bring them to a party and see what level of carbonation is best.

The things that held me back was I did not have an event where I could bring 4 gallons of cider.  Then we started planning a party…

I had a big brewing day.  I was making a mild with 2nd runnings from brewing  at Tom Schmidling’s, and I was brewing 3 versions of a CDA with 3 smoked malts (future post).  The counters were full of brewing goodnesses.

    WP_000622

    The Test

    I went for a reduced experiment.

    1. 2 1 Gallon jugs of cider (same as previous).
    2. Put hydrated yeast in both,
    3. Just place the lids on loosely
    4. at 20 hours I closed the lid on #1.
    5. With in 2 hours it was puffing":
    6. WP_000624

      Hmmm, This is science so I should measure
      :WP_000625
      5 hours later, this is starting to look like a bad idea, and by bad idea, I mean explosively bad, and by that, I mean AWESOME.
       WP_000629
      I decided  to take a precaution and put the sealed jug in a pot:
      WP_000626
      Yeah, that is going to blow… I put a grocery bag over the top… Which was a great idea, when 2 hours later, it blew:WP_000631WP_000632WP_000634

    The sound was like a gunshot.  Amazingly, no one woke up for that…

    Since I still had a gallon of cider, or so, in the pot, I decided to pour it into a 2 liter bottle and put an airlock in the top.  Now when you write that sentence the fact that 2 litres is significantly less than 1 gallon seems obvious, but at the time it did not.  The problem was pouring from a large pot into a 2 litre bottle.  I did it in the sink, with the idea that any spills would go into the sink…

    It worked, for filling.  It was tricky, holding a funnel and bottle in one hand, and pouring from a 3 gallon pot in the other (2 liter bottles are not very tip proof).  I poured the cider in, suddenly realizing I has too much in the pot.  I then carefully put pot on the counter.  Did I mention the counter was full of brewing goodness, ginger bread houses, and other things?  Well I carefully set the pot on the counter, making sure it was stable, only to discover it was not.  The liquid in the pot has sloshed toward the middle of the counter letting me thing it was stable, and then sloshed back informing me it was not, by dropping to the floor.  The loud clatter was what woke people up, and made the floor sticky, not the explosion.  I mopped the floor 3 times that night, and it was still sticky the next day.

    Results/Observations

    The results are that you cannot carbonate in the juice jugs, they are not pressure worthy.

    Conclusion

    This was likely a known bad idea Smile had I thought about the jugs [insert joke here].  I could have test the pressure worthiness of the jug before hand.  However, using a 2 litre bottle as a back gave me a further idea, that I could just ferment the 2 gallons in 4 of those. 

    So the idea of just going to the store for cider and the LHBS for wine yeast and having cider in a week, now requires more equipment (bottles seem to hold up to 200PSI), but that can be found material.

    B-Day Labels #10 Mango Madness #2

    MORE MANGO!

    This is follow up to Mango Madness.

    This time around I had more mango, I also added 3-4 perfectly ripe peaches, and I left the pulp and pits in the mango (it was only in the fermenter for 2 weeks, I removed the peach pits but did not peel them).

    The results was more mango, but also, over time, a bitterness from the pulp (or more like an astringency).  This turns out to be a good thing.  I brought the keg to Beer Stock shortly after kegging, and people loved it, and most said “Needs more Hops.”

    Not a surprise at a NW Homebrew Event.  But in reality, what was happening was the mango cloyingness was overwhelming the 50 IBUs already there.  As the CO2 has taken effect and the astringency kicked in, it has balanced better.  I still might crank up the IBUs 5 more anyway.   Also the efficiency of the grist was way off (1052 instead of 1060) and that may be adding to the sweetness.  When I racked from secondary, before adding Mango,  it was thickkkkkkkk.

    The picture on the label seems to be a screen shot from some flash game I could not find.  I did use a new trick.  Word seems to be struggling with all the Word Art (the CPU spikes when I move the labels as it renders everything).  I create one document with the word art, and just one label.  I then paste it into another, “As a Picture.”  then I use that picture to make 6 labels.  The second document is does not cause all the CPU loading.

    image

    Hopville.com recipe:  http://hopville.com/recipe/841437/american-ipa-recipes/mango-madness-2

    %d bloggers like this: